How to Download and Install Pofung BF-888S Programming Software
How to Download and Install Pofung BF-888S Programming Software
If you own a Pofung BF-888S walkie talkie, you may want to program it with your preferred frequencies and settings. To do that, you need a programming software that is compatible with your device. In this article, we will show you how to download and install the Pofung BF-888S programming software on your Windows computer.
pofung bf-888s programming software download
What is Pofung BF-888S Programming Software?
Pofung BF-888S programming software is a software application that allows you to customize the features and functions of your Pofung BF-888S radio. You can use it to change the frequency range, channel names, squelch level, power output, scan mode, CTCSS/DCS codes, and more. You can also save and load different configurations for different scenarios.
Pofung BF-888S programming software is also known as Baofeng BF-888S programming software, as Pofung is the new brand name of Baofeng in some markets. The software is available for free from the official Baofeng website[^1^] or from other online sources[^2^]. However, you should always check the authenticity and compatibility of the software before downloading it.
How to Download and Install Pofung BF-888S Programming Software?
To download and install Pofung BF-888S programming software, you need a Windows computer and a USB programming cable that connects your radio to your computer. You also need to know the model information of your radio, which can be found on the back of the battery or on a sticker inside the battery compartment. There are two known models of the BF-888S: UHF4 [400-470MHz] and UHF5 [470-490MHz]. The latter model also has a beat shift or scrambler function that can be enabled or disabled by the software.
Here are the steps to download and install Pofung BF-888S programming software:
Turn on your computer and check if your system meets the requirements. The software works on Windows XP, Vista, 7, 8, and 10.
Go to the official Baofeng website[^1^] or another trusted source[^2^] and download the software file for your model. The file name should be something like BF-888S.exe or BF-888S.zip.
Extract the zip file if necessary and run the exe file to install the software. Follow the instructions on the screen to complete the installation.
Connect your USB programming cable to your computer and plug the other end into your radio. Make sure your radio is turned off before connecting it.
Launch the programming software and click on Setting / Communication Port. Select the COM port that corresponds to your cable. If you are not sure which COM port it is, you can use a tool like FindComPort.exe[^2^] to identify it.
Click on Read from Radio to load the current settings of your radio into the software. You can also save this file as a backup or recovery file in case you need to restore it later.
Edit the settings as you wish using the spreadsheet interface of the software. You can change any parameter by double-clicking on it and entering a new value. You can also copy and paste values from one channel to another.
Click on Write to Radio to save your changes to your radio. Wait for the process to finish and disconnect your cable.
Turn on your radio and test if everything works as expected. Enjoy your customized Pofung BF-888S!
Conclusion
Pofung BF-888S programming software is a useful tool that lets you personalize your radio according to your needs and preferences. It is easy to download and install on your Windows computer, as long as you have a compatible USB cable and know your model information. With this software, you can unlock the full potential of your Pofung BF-888S walkie talkie. 29c81ba772